What a Commercial Roof Inspection Includes

What gets checked, what the report includes, and how often to inspect.

Aerial view of an apartment building with a gray shingle roof and a flat center section lined with rooftop AC units.

A commercial roof inspection tells you the condition of the roof, what needs fixing now, and how many years it has left, in writing and with photos. On a low-slope roof most problems start small and out of sight, so an inspection is the cheapest way to plan repairs and budget for replacement before a leak forces the decision. Ours come at no cost, with a written report within 24 to 48 hours.

What gets checked on the roof

  • The membrane field: blisters, cracks, shrinkage, punctures and worn spots, especially around rooftop equipment where service techs walk
  • Seams and laps: open or lifting seams on TPO, PVC and modified bitumen
  • Flashing: at parapet walls, curbs, rooftop units, pipes and other penetrations, where most commercial leaks start
  • Drainage: drains, scuppers, gutters and downspouts, and any ponding that stays more than 48 hours after rain
  • Edge metal and coping: loose or lifted sections that let wind get under the roof
  • Storm damage: hail bruising, punctures and wind-lifted areas after severe weather

What gets checked from inside

Where we can reach it, we look at the underside of the deck and the top-floor ceilings for stains, damaged ceiling tiles, rust on a metal deck and signs of past leaks. Interior damage often shows where to look on the roof.

Core samples and moisture scans

Water trapped under a membrane doesn't show on the surface. Core samples, small cuts down to the deck that are patched afterward, show whether the insulation is wet and how many roof layers there are. We take them as needed. On larger roofs, or when core samples are mixed, an infrared or moisture scan maps the wet areas across the whole roof. Scans cost extra. Both answers matter most when you're deciding between recover and tear-off.

What the report includes

You get photos of what we found, a written summary of the roof's condition and the problems by priority, and recommendations: repair, maintain, recover or replace. We recommend repair only when it will keep water out for at least one to two years. If you need repair pricing, the bid comes within 24 to 48 hours. Property managers can pass the report straight to owners or asset managers.

How often to inspect

  • Twice a year, in spring before storm season and in fall after the summer heat
  • After any hail or high-wind event, to document damage while it's fresh. We document it, meet the adjuster and work with your insurance carrier; we don't act as the adjuster.
  • Before you buy or lease a building, so the roof's condition is part of the deal
  • Before a warranty runs out, so covered problems are reported in time

Inspections as part of a maintenance plan

Our commercial roof maintenance plans build the twice-yearly inspection in, with documentation of any repairs needed. Repairs are done by contract, and owners can still get other bids on larger work. Regular inspections are also how you get the full service life out of a commercial roof before replacement.

Schedule an inspection

We inspect apartment communities, retail centers and other commercial buildings across San Antonio and Austin, and we send certificates of insurance the same business day. Request a bid to get on the schedule.

USA Home & Commercial
USA Home & Commercial Team
get started today

Still Have Questions?

Whatever you're dealing with, we're happy to take a look and tell you straight.